Skip to content
Workouts

Spanish Squat: How to Do It, Muscles Worked and Benefits

Nadia Popescu

By Nadia Popescu, Strength & Conditioning Writer · Updated 19 November 2026

The Spanish squat is a bodyweight squat where a heavy band, anchored in front of you, sits behind both knees and holds your shins upright as you sit down. Leaning back into the band lets you drop your hips without your knees drifting forward, which turns it into one of the most quad-focused squats you can do without a machine. Physios use it a lot for patellar tendon pain because you can load the quads hard, at a depth you choose, and hold still. It needs one band and one solid anchor, and that's it.

How to do a Spanish squat

You need a long, heavy loop band (or a strong strap) and something immovable at knee height. A squat rack upright is ideal, and a solid post or a heavy table leg can work if you're sure it won't shift.

  1. Anchor the band. Loop it around the anchor at roughly knee height so both ends face you. If one band feels too stretchy, double it up or use two.
  2. Step in. Stand inside the loop facing the anchor, with the band sitting behind both knees just below the crease, across the top of your calves.
  3. Walk back. Step backwards until the band is properly taut. Feet go hip-width apart, toes pointing forward or turned out very slightly.
  4. Lean back and sit. Keep your chest tall and sit straight down, letting the band take some of your weight so your shins stay close to vertical. Your knees should stay roughly over your ankles, not over your toes.
  5. Find your depth. Stop somewhere between a quarter squat and thighs parallel, depending on comfort. For holds, 60 to 90 degrees of knee bend covers what most rehab programmes use.
  6. Hold or drive up. Either hold that position or push through your whole foot to stand, keeping tension in the band throughout.

The cue that makes it work

Sit down, not back. You're not reaching your hips behind you like a box squat; you're dropping them straight under you while the band pins your knees. If your shins start tipping forward, walk further back for more tension.

Muscles worked

This is a quad exercise first and last. With vertical shins and an upright torso, your knees do almost all the bending while your hips bend only a little, so the work shifts away from the glutes and onto the front of the thigh.

  • Quadriceps. All four heads, including the vastus medialis near the inside of the knee, do the heavy lifting. Holds in the bottom position will have your thighs shaking within 30 seconds.
  • Glutes and hamstrings. They help, but far less than in a goblet squat, because the hip angle stays fairly open.
  • Calves and core. Your calves steady the ankle and your trunk stops you folding as you lean into the band.

If your goal is size in the glutes, this isn't the squat for it. If you want to isolate the quads without a leg extension machine, it's one of the best options going.

Benefits

It's knee-friendly for a lot of people. Keeping the shins vertical changes where the load sits compared with a squat where the knees travel well past the toes, and plenty of people who can't squat comfortably find they can do Spanish squats. Comfort varies from knee to knee, so let your own symptoms decide rather than a rule.

It suits heavy isometric work for the patellar tendon. In a small crossover trial of six volleyball players with patellar tendinopathy, five 45-second heavy quad holds cut pain on a single-leg decline squat far more than slow reps did, and the effect lasted at least 45 minutes (Rio et al., 2015). Those holds were done on a leg extension machine, not a band. Later research is more mixed: when in-season athletes did a four-week programme, isometric and isotonic exercise reduced pain by similar amounts (van Ark et al., 2016). So holds are a reasonable tool for calming a sore tendon, not a guaranteed painkiller. The Spanish squat is simply a practical way to load the quads isometrically at home.

It slots into longer-term strength work. For lasting change, heavy slow resistance training matters more than any single exercise. In a 12-week trial, heavy slow resistance and eccentric decline squats both kept their improvements at six months, while corticosteroid injections did not, and patients were most satisfied with the heavy slow programme (Kongsgaard et al., 2009). Spanish squats often sit early in that kind of plan, before heavier squats and leg presses.

It costs almost nothing. One band and a rack upright, done.

Knee pain? See a physio first

Pain below the kneecap that's been around for weeks, swelling, locking or giving way needs a proper assessment. A physio can confirm what's going on and set your depth, hold times and progression. Use this guide to understand the exercise, not to self-diagnose.

Common mistakes

Not enough band tension. If the band is slack, your knees slide forward and it becomes an ordinary squat. Walk back until the band is genuinely taut, or add a second band.

Placing the band too high or too low. Sitting on the back of the thigh, it'll ride up; down on the calves, it'll slip off. Just below the knee crease is the spot.

Sitting the hips back. Pushing your bottom backwards and hinging forward turns the move into a hip exercise. Keep your torso upright and drop straight down.

Going too deep too soon. Deeper isn't automatically better here, especially with a sore tendon. Start at a depth that stays comfortable and add range over weeks.

A wobbly anchor. A light rack or a door handle can move or fail under load, and you'll fall backwards. Use something heavy or fixed, and check it before every set.

Variations and progressions

Start with short holds at a shallow depth, then progress one variable at a time.

  • Longer holds. Build from 30 to 45 seconds, then up to 60 seconds.
  • Deeper holds. Move from a quarter squat towards parallel as your knees tolerate it.
  • Slow reps. Once holds feel easy, do slow reps: 3 seconds down, 3 seconds up, no pause at the top.
  • Weighted Spanish squat. Hold a dumbbell or kettlebell at your chest, goblet style, to add load without changing the position.
  • Single-leg Spanish squat. Lift one foot and sit down on the other leg. This roughly doubles the load on the working quad and is a big jump, so earn it.

When these feel strong, the natural next steps are the sissy squat or heavier squats and leg presses. If you just want a no-kit isometric to pair with it, the wall sit works the quads in a similar way.

Sets and reps

  • Isometric holds (common for sore tendons): 5 holds of 30 to 45 seconds, 1 to 2 minutes rest, once or twice a day on painful days if your physio agrees.
  • Strength: 3 to 4 sets of 8 to 12 slow reps, 2 to 3 times a week, with a weight at your chest once bodyweight gets easy.
  • Warm-up before leg day: 2 holds of 30 seconds to switch the quads on before squats or lunges.

A useful guide for knee pain: discomfort during the exercise that stays at 3 out of 10 or lower, and settles by the next morning, is usually acceptable. If it's worse the next day, reduce depth or hold time.

A long pull-up assistance band is the easiest thing to anchor around a rack. The FitBeast five-band set has loops of around 208cm, up to a heavy 50 to 125lb band, and was around £31.99 at the time of writing.

Check the FitBeast long loop band set on Amazon

For more home exercises built around sore or weak knees, see our knee strengthening exercises.

Recommended reads

  1. Leg extension alternatives: 9 quad swaps for home or the gym
  2. Knee strengthening exercises at home
  3. Sissy squat: how to do it and muscles worked
  4. Wall sit: how to do it and benefits
  5. The best resistance bands in the UK

Frequently asked questions

What is a Spanish squat?

A Spanish squat is a squat done with a heavy band or strap looped around a fixed anchor and sitting behind both knees. You lean back into the band and sit down with your shins close to vertical, so the band stops your knees travelling forward. The result is a very quad-heavy squat that many people with sore knees find more comfortable than a normal squat.

What muscles does the Spanish squat work?

Mostly the quadriceps, the four muscles on the front of your thigh. Because your hips stay fairly high and your torso stays upright, the glutes and hamstrings do less than in a goblet or back squat. Your calves and core work a little to keep you balanced against the band.

Is the Spanish squat good for patellar tendinopathy?

It's one of the exercises physios commonly use for patellar tendon pain, usually as a long isometric hold. Research on heavy isometric quad holds (done on a leg extension machine in the main studies) found they can reduce tendon pain in the short term, and heavy slow strength work helps over months. The Spanish squat is a practical way to get that kind of quad load at home, but it isn't a cure, and anyone with ongoing knee pain should get it assessed by a physio first.

How long should you hold a Spanish squat?

A common starting point is 5 holds of 30 to 45 seconds with 1 to 2 minutes rest between them. Choose a depth and band tension that feel hard on the quads but keep any knee pain at a level you'd rate 3 out of 10 or lower. Add time, depth or tension gradually over a few weeks.

What can I use instead of a band for a Spanish squat?

A long, heavy loop band (the pull-up assistance type) is the easiest option. A thick lifting strap, a cargo strap or a yoga strap looped around a rack upright also works, and some people use two bands for extra support. Whatever you use has to be anchored to something that genuinely won't move, like a squat rack bolted or weighted down, or a sturdy post.

Related guides

Best Exercise is a participant in the Amazon EU Associates Programme, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk. As an Amazon Associate we earn from qualifying purchases. This comes at no extra cost to you and never influences our independent reviews or rankings.